
What roofers actually need from the software
A roof job is small. A house is a short flight and a few dozen to a couple of hundred photos, and the deliverable is not a survey. It is a picture the homeowner trusts, a measured area for the quote and a set of marked defects an adjuster can follow. That narrows the checklist to five things:
1. An orthomosaic sharp enough to read shingles, seams and flashing.
2. Area and length measurements, with the slope added back.
3. Annotations on the map, not photo numbers in an email.
4. A link the customer opens without creating an account.
5. A price that makes sense per roof, not per engineer.
Everything else in a mapping package, such as contours, volumes and ground control accuracy reports, is built for surveyors. You can pay for it, but a roofing crew rarely opens it. Our drone roof inspection software page shows the workflow end to end.
Drone roof inspection software prices side by side
Prices below are published list prices in USD, checked in October and November 2026 for the tools covered in our pricing articles. Check your own quote before you buy, because resellers bundle.
| Tool | Published price | Seats and limits | Best for |
|---|---|---|---|
| WebODM Lightning Pro | $35 a month on yearly billing, $420 a year | Seat count not stated, 1,500 images per map | One pilot who tunes settings |
| Agisoft Metashape Professional | $3,499 once per computer | One computer, Windows, Mac or Linux | A pilot who processes alone and wants to own it |
| PIX4Dmatic | From $2,290 a year | Per license, desktop | A firm that already flies large mapping jobs |
| SimActive Correlator3D | $2,950 a year or $5,900 permanent | Per computer, Windows | Teams with heavy photogrammetry needs |
| DroneDeploy Flight and Analysis | $4,188 a year for 1 user | Higher plans are quoted | Enterprise programs with fleet management |
| DroneMapping Starter | $588 a year, or $99 a month | 3 seats, 3,000 images a month | A small crew that needs maps and measurements |
| DroneMapping Team | $1,488 a year, or $249 a month | 10 seats, 15,000 images a month, 3D model, annotations, branded share page | A contractor with estimators and crew leads |
Details for each tool sit in our articles on WebODM pricing, Agisoft Metashape pricing, PIX4Dmatic pricing and DroneDeploy pricing, and the full 16 tool table is in drone mapping software pricing.
What a three-person roofing firm pays over 3 years
Picture an owner who flies, an estimator who builds quotes and a crew lead who checks the marked defects before a job starts. All three need to open the map.
| Over 3 years | Software cost | Who can open it |
|---|---|---|
| WebODM Lightning Pro | $1,260 | Seat count not stated, share exported files |
| Metashape Professional | $3,499 once per computer | One computer, so share exported files |
| DroneDeploy Flight and Analysis, 1 user | $12,564 | 1 user, more users quoted |
| DroneMapping Starter | $1,764 | 3 seats and a view link for customers |
| DroneMapping Team | $4,464 | 10 seats and a view link for customers |
The cheapest lines are the ones where one person owns the software and everyone else gets exported files. That works until the estimator needs to re-measure a slope at 6 pm and the pilot is on another roof.
The cost of one inspection
Software cost per roof is the number that matters. A crew that inspects 20 roofs a month does 240 a year. Starter at $588 a year works out to $2.45 per inspection. Team at $1,488 a year is $6.20 per inspection, and that includes the 3D model, annotations and the branded share page. Compare that with the 30 to 60 minutes a person spends on a ladder, or with a sent-back quote because the homeowner could not follow a folder of photos. The software cost is small next to the labor it removes, so the real decision is the fit, not the price.
Treat it like any other spend and run the numbers before you commit. The same habit applies to idle cash, and a tool such as agenttrading.ai backtests a trading idea on historical data before money goes in.
When another option is better
Be honest about the limits.
- One pilot, no estimator: Metashape Professional or WebODM Pro is cheaper per year and you keep the engine.
- A single insurance measurement report: a dedicated roof measurement service produces that one document faster than any mapping platform.
- Thermal moisture surveys: DroneMapping does not process thermal imagery, so use a thermal workflow for those.
- Whole subdivisions in one run: DroneMapping takes up to 500 photos per flight, so large areas are split.
Commercial flights in the US also need a Part 107 certificate, described on the FAA commercial operators page.
How to test roof inspection software on your last job
1. Pick a finished roof with a measured area you trust.
2. Upload the same photos.
3. Measure each slope on the map and apply the slope factor, for example 1.118 for a 6 in 12 pitch.
4. Compare the total with your number.
5. Send the share link to a colleague with no account.
If the area matches and the colleague can find every marked defect, price the plan. The demo checks your flight metadata without an upload.
Which plan fits which crew?
Starter fits an owner-operator with a helper. Team fits a contractor with an estimator and a crew lead, and adds the 3D model for dormers and facades. Business, at $3,588 a year with 25 seats, fits a drone service provider who flies for several roofers and needs roles, a progress timeline and change detection. See every plan on the pricing page, or compare this approach with a Pix4D alternative if you already own desktop licenses.
What is the best drone software for roof inspections?
The best choice is the one that gives a measured, annotated map your customer can open. For a crew with an estimator, a seat-based cloud plan such as DroneMapping Team fits. For one pilot working alone, Metashape Professional or WebODM Pro costs less per year.
How much does drone roof inspection software cost?
Published prices run from $420 a year for WebODM Lightning Pro to $4,188 a year for one DroneDeploy user. DroneMapping starts at $588 a year with 3 seats, which is $2.45 per inspection at 20 roofs a month.
Can drone software calculate roofing squares?
Yes, from the measured area. The orthomosaic gives plan-view area, so multiply each section by its slope factor, then divide by 100 square feet per square. A 2,400 square foot footprint at 6 in 12 pitch is about 26.8 squares.
Do customers need an account to see the roof map?
No. They open a view link in any browser, see the map and your annotations, and reply in the comments.