Landfill drone survey software that measures airspace used and cell volume against the permitted design after every flight
Landfill drone survey software turns a flight over the active face into a terrain model, contours and a volume against the permitted design surface, so the operator knows how much airspace was consumed since the last survey. DroneMapping processes the photos in the browser, compares the new surface with the previous survey or the final grade design, and reports cubic yards gained, remaining capacity and a checkpoint accuracy report an engineer can sign. Team is $1,488 a year with 10 seats, so the site manager, the engineer and the hauler's controller all open the same map.
net volume
net volume
Why airspace is measured from the air
Capacity is the asset and the active face moves every day
A landfill sells airspace. Every cubic yard consumed is revenue booked and every cubic yard left is the remaining life of the site, so a few percent of error on the volume is a number the owner cares about. A traditional topo of an active fill takes a crew with a rover a day or two, leaves gaps on steep slopes and puts people on a surface with heavy equipment moving. A drone flight covers the whole face in under an hour of air time, with no one walking on loose waste, and the surface it produces is dense enough to show lift lines and benches.
- Surface of the whole fill compared with the previous survey, cell by cell
- Cubic yards of airspace consumed between two dates
- Remaining capacity against the permitted final grade design
- Contours and a terrain model as DXF or SHP for the engineer's CAD
- Checkpoint residuals so the volume carries a stated accuracy
Deliverables
What a landfill flight gives you
Upload geotagged JPEGs from any mapping drone. You get an orthomosaic as GeoTIFF, a digital surface model, a digital terrain model with equipment and vegetation filtered out, contours as DXF or SHP, and on Team and above a cut and fill raster and a PDF report. Place checkpoints on stable ground around the fill, on roads and pads, and the report gives the error in X, Y and Z, so the volume goes to the engineer with the method stated. The comparison itself is the one described on the cut and fill software page, and the control workflow is on the drone survey software page.

Worked example
One quarter of fill, from cubic yards to tons and dollars
Take a cell that was surveyed on October 1 and flown again on January 1. The new surface minus the old one gives a net gain. These figures are an example to show the arithmetic, so use your own survey and your own compaction number from scale house records.
| Step | Value |
|---|---|
| Net gain between the two surfaces | 38,500 cubic yards |
| Tons received in the quarter, from scale tickets | 41,800 tons |
| Compaction in place | 41,800 tons divided by 38,500 cubic yards, 1.09 tons per cubic yard |
| Airspace remaining against final grade | 612,000 cubic yards |
| Quarters of life left at this rate | 15.9 |
The tons per cubic yard figure is the one site managers watch, because a drop means the crew is compacting worse or covering more soil than planned. It only works with a survey that closes the same way every time, which is why the checkpoint report matters. Scale house tickets and hauler invoices often arrive as PDFs, and a tool such as Invoicesocr turns those into a spreadsheet you can divide against the survey volume.
How it works
From the flight to the quarterly report
1. Set checkpoints on stable ground around the fill and fly with 75 percent front and 70 percent side overlap. Waste faces are low texture in places, so fly a little lower than for a pad.
2. Upload the photos and the control file in your coordinate system.
3. Compare the new surface with the previous survey and with the final grade design as GeoTIFFs.
4. Read cubic yards gained, remaining airspace and the checkpoint report, then export the volume table as CSV.
5. Send the view link to the engineer and the owner, and keep each flight on one timeline.
The drone progress monitoring software page shows the timeline view and the stockpile volume measurement page covers cover soil and aggregate piles on the same site.
How the options compare
Landfill survey options by what you pay and who can open the result
Prices are published list prices checked in October and November 2026. Check your own quote before you buy, because resellers bundle.
| Option | Published price | Volume against a design surface | Who can open the results |
|---|---|---|---|
| Survey crew with a rover | Quoted per visit | Done in CAD after the visit | A PDF and a drawing |
| Pix4Dmapper | $3,990 a year | Needs a separate CAD or survey package | One license, desktop |
| Agisoft Metashape Professional | $3,499 once per computer | Build both surfaces yourself | One computer |
| DroneDeploy Flight & Analysis | $4,188 a year for 1 admin user | Volume tools, higher plans quoted | Shared links |
| DroneMapping Team | $1,488 a year, 10 seats | Included, design surface as GeoTIFF | 10 seats plus view links |
Detail on each is in drone mapping software pricing and on the DroneDeploy alternative page.
Honest fit
When this is not the right tool
A drone map is a surface of what the camera sees. It does not see below the surface, it cannot measure a cell under a roof or a tarp it cannot read, and it does not tell you what is in the waste. Your regulator may require a survey stamped by a licensed surveyor, and DroneMapping does not replace that stamp, it gives your surveyor or engineer a faster and denser surface to work from. Gas wells, leachate and methane are outside the product, and so are thermal and LiDAR data. DroneMapping processes up to 500 photos per flight, so a large landfill is flown in blocks. Paid drone work in the US needs a Part 107 certificate, described on the FAA commercial operators page, and the EPA landfills page is the place to start for federal landfill rules.
Try it first
See a surface comparison in the demo
The demo loads an earthworks pad on a public elevation surface. Switch on cut and fill, read the net volume and open the contours. No account is needed.
Pricing
What a landfill survey program costs per year
Starter is $99 a month or $588 a year with 3 seats and 3,000 images a month. Team is $249 a month or $1,488 a year with 10 seats, 15,000 images a month, design surfaces and checkpoint reports, enough for a quarterly survey plus monthly volume checks on several cells. Business is $599 a month or $3,588 a year with 25 seats for an operator with several sites. The price does not change when you add a flight or a cell.
Questions
Landfill drone survey software FAQ
The best fit compares each flight with the previous survey and the final grade design, reports cubic yards with a checkpoint accuracy report, and has seats for the engineer and the site manager. DroneMapping does this on Team at $1,488 a year with 10 seats.
Fly the fill with checkpoints on stable ground, build a surface model and subtract the previous survey or the design surface. The result is cubic yards of airspace used and remaining. Check the checkpoint report before you accept the number.
Many operators survey every quarter or twice a year, and some fly monthly to track compaction. Your permit sets the minimum, so check it. A flat plan means a monthly flight costs nothing extra.
No. A drone survey gives a dense surface and volume with a stated accuracy, but a stamped survey still needs a licensed surveyor where your regulator or permit requires one. The drone map is the faster input.
Yes, up to 500 photos per flight. Fly the site block by block, upload each flight and compare each block with its own part of the earlier survey.
Related pages
More for site and earthwork teams
Measure the next quarter of airspace from one flight
Fly the fill, compare it with the last survey and send the engineer the map.