Drone mapping software for homebuilders and land developers who check pads, dirt and progress across every community
Drone mapping software for homebuilders turns one flight over a subdivision phase into an orthomosaic, a surface model and a pad by pad comparison with the grading plan, so the land development manager sees which lots are high or low before the slab crew arrives. DroneMapping processes the photos in the browser, reports cut and fill and dirt balance in cubic yards, and puts every flight of every community on one timeline. Team is $1,488 a year with 10 seats, so land development, superintendents and purchasing open the same map without a desktop license each.
net volume
net volume
Why builders fly their communities
A bad pad costs more after the forms are set
A production builder pours dozens of slabs a month, and each one sits on a pad that the grading sub was supposed to bring to the plan elevation. When a pad is a tenth of a foot low, the fix before forming is a few loads of dirt. After the slab is poured, it is a drainage complaint, a lot that does not meet the plot plan and sometimes a warranty claim. A survey crew can shoot pads, but it bills per visit and covers a phase in a day or more, so most builders check a sample and hope. A drone flight covers a 30 acre phase in under an hour of air time and measures every pad, every swale and every dirt pile on the same afternoon.
- Every pad in the phase compared with the grading plan elevation
- Dirt balance for the phase, import or export in cubic yards and truck loads
- Progress by lot for the weekly land and construction meeting
- Stockpiles of spoils, base and sand measured from the same flight
- One link for the division president, the engineer and the grading sub
Deliverables
What one subdivision flight gives the land team
Upload geotagged JPEGs from any mapping drone. You get an orthomosaic as GeoTIFF, a digital surface model, a digital terrain model with houses, trucks and trees filtered out, contours as DXF or SHP, and on Team and above a cut and fill raster against the design surface you upload. Load the grading plan as a GeoTIFF surface and every pad shows as a color, green within your tolerance, red and blue outside it. Checkpoints on curbs or survey monuments give an accuracy report in X, Y and Z, so the number you send the grading sub has a stated error. The comparison itself is the one on the cut and fill software page.

Worked example
One phase of 120 lots, from pad check to truck loads
Take phase 2 of a community with 120 lots on 28 acres. These figures are an example to show the arithmetic, so use your own grading plan, tolerance and hauler rate.
| Step | Value |
|---|---|
| Phase area | 28 acres, 120 lots |
| Photos at 200 ft with 75 percent front and 70 percent side overlap | About 320, one flight |
| Pads within plus or minus 0.10 ft of plan | 106 of 120 |
| Pads high, cut needed | 9 pads, 410 cubic yards in total |
| Pads low, fill needed | 5 pads, 180 cubic yards in total |
| Net for the phase after balancing on site | 230 cubic yards of export |
| Truck loads at 12 cubic yards each | 20 loads |
| Haul cost at an example $95 per load | $1,900 |
Without the flight, the 14 pads outside tolerance usually surface one at a time when the form crew shoots grade, and each one stops a crew for a day. With the map, the grading sub gets one list of 14 lot numbers and one export ticket. Builders who launch a separate website for each new community often buy an aged domain for it through Seodomain, and the same orthomosaic doubles as a current aerial for the lot map on that site.
How it works
From the flight to the land meeting
1. Fly the phase at 200 ft with 75 percent front and 70 percent side overlap, with four or five checkpoints on curbs or monuments.
2. Upload the photos and the control file in your State Plane zone.
3. Upload the grading plan surface as a GeoTIFF and run cut and fill against it.
4. Read the pads outside tolerance, the dirt balance and the checkpoint report, then export the table as CSV.
5. Send the view link to the grading sub and the engineer, and keep every flight on the community timeline.
The drone progress monitoring software page shows the timeline view, and stockpile volume measurement covers spoils and base piles on the same flight.
How the options compare
Pad checks and dirt balance by what a builder pays and who can open the result
Prices are published list prices checked in October and November 2026. Check your own quote, because resellers bundle.
| Option | Published price | Pad check against grading plan | Who can open the results |
|---|---|---|---|
| Survey crew shooting pads | Quoted per visit | Sample of pads per visit | A PDF and a spreadsheet |
| DroneDeploy Flight & Analysis | $4,188 a year for 1 admin user | Volume tools, higher plans quoted | Shared links, more users quoted |
| Site Scan for ArcGIS | $5,310 a year per Operator license | Yes, inside ArcGIS | One uploader per license, Access quoted |
| Propeller | Quoted, AeroPoints from $1,000 each | Yes, earthworks focus | Quoted per site |
| DroneMapping Team | $1,488 a year, 10 seats | Included, grading plan as GeoTIFF | 10 seats plus view links |
The cost detail is in DroneDeploy pricing and on the Site Scan price comparison, and our roundup of the best drone software for construction scores the same tools for general contractors.
Honest fit
When this is not the right tool
A drone map measures the surface the camera sees. It does not replace the lot grading certificate or the as-built that your engineer or licensed surveyor signs for the city, and it does not see under a tarp, standing water or thick weeds. It does not do interior capture, thermal or LiDAR, and it does not schedule trades or run purchase orders. DroneMapping processes up to 500 photos per flight, so a large master planned community is flown phase by phase. Paid drone flights in the US need a Part 107 certificate, described on the FAA commercial operators page. Many builders also use the weekly map to document erosion control for the stormwater permit, and the EPA construction stormwater page sets out what the permit expects.
Try it first
Check an earthworks pad in the demo
The demo loads an earthworks pad on a public elevation surface. Switch on cut and fill, read the net volume and open the contours. No account is needed.
Pricing
What a builder pays per year for every community
Starter is $99 a month or $588 a year with 3 seats and 3,000 images a month, enough for one active community flown weekly. Team is $249 a month or $1,488 a year with 10 seats, 15,000 images a month, design surfaces and checkpoint reports, which covers a division with four or five communities flown every week. Business is $599 a month or $3,588 a year with 25 seats for a builder with several divisions. The price does not change when you add a phase or a flight.
Questions
Drone mapping software for homebuilders FAQ
The best fit checks every pad against the grading plan, reports dirt balance in cubic yards, keeps each community on a timeline and gives seats to land development and superintendents. DroneMapping does this on Team at $1,488 a year with 10 seats and view links for subs.
With checkpoints on curbs or monuments and a flight at 200 ft, vertical error on open graded dirt is typically a few hundredths of a foot, and the checkpoint report states it for your site. Grass, water and shadows raise the error, so read the report before acting.
No. The certificate or as-built the city asks for is signed by your engineer or licensed surveyor. The drone map tells you which pads to fix before forming and gives the surveyor a dense surface to check, so the certificate comes back clean.
Most land teams fly each active phase once a week during grading and once a month during vertical construction. A flat plan means a weekly flight across every community costs nothing extra.
Yes. DroneMapping processes geotagged JPEGs from DJI, Autel, Skydio and other mapping drones. Fly with any planning app that sets overlap and altitude.
Related pages
More for builders and site teams
- Construction drone software for general contractors on commercial sites
- Cut and fill software for surface comparisons against design
- Drone survey software for control, checkpoints and contours
- DroneDeploy alternative for teams priced per user today
- Best drone mapping software compared by job and budget
Check every pad in the next phase from one flight
Fly the phase, compare it with the grading plan and send the grading sub one list.