DroneMapping

Drone topography software that turns one flight into contours and a terrain model

Drone topography software turns the photos from one flight into a terrain model, then draws contour lines, spot elevations and cross sections from it, so a site that took a crew two days with a total station is captured in an hour of flying. DroneMapping builds the digital terrain model in the cloud, exports contours as DXF and SHP for CAD, and on Team adds ground control points and a checkpoint report that shows the error against surveyed points. Starter is $588 a year, Team is $1,488 a year with 10 seats.

Try the demo
Earthworks pad, sample
Loading sample

net volume

Measurements
Area
Perimeter
Cut
Fill
Base plane method

Why drone topography

A topographic survey is slow on foot and cheap from the air

A ground crew shoots points on a grid, often 25 to 50 feet apart, and the surface between the points is guessed. A drone flight records hundreds of thousands of surface points on the same site, so the contours follow the real ground instead of an interpolation of a few hundred shots. That matters most on sites with rolling grade, ditches, berms and stockpiles, where a missed break line moves a quantity.

  • Contours at 0.5, 1, 2 or 5 foot intervals from the terrain model
  • Spot elevations and elevation profiles drawn on the map
  • Slope and drainage checks before a design is drawn
  • Volume, cut and fill against a design surface or a previous survey
  • Delivery as DXF, SHP and GeoTIFF that open in Civil 3D, QGIS and ArcGIS

Deliverables

What you get from one topographic flight

Each plan produces an orthomosaic, a digital surface model that includes trees, buildings and equipment, and a digital terrain model with those objects filtered out. Contours come from the terrain model. Team adds checkpoints, so the report states how far the model sits from points your surveyor measured, and cut and fill against a design surface or an earlier flight.

Contours and terrain model of an earthworks pad drawn from one drone flight

Worked example

How contour interval and flight height are chosen

The interval you can trust depends on the vertical accuracy of the model, and that follows ground sampling distance, overlap and ground control. The table is a rule of thumb for a mapping drone with a 1 inch sensor, checked by checkpoints on your own job. These are example figures, not a guarantee.

Site and job Flight height Typical contour interval Control you need
Rough grading check on bare ground 100 m (328 ft) 1 ft 5 ground control points, 3 checkpoints
Preliminary site plan for a design team 80 m (262 ft) 1 ft 6 ground control points, 4 checkpoints
Large pasture or farmland, drainage 120 m (394 ft) 2 to 5 ft 5 ground control points
Pavement or detailed building pad 60 m (197 ft) 0.5 ft, with surveyor review Dense control, checkpoints mandatory

Tall grass and dense brush hide the ground. The terrain model then reads the top of the vegetation, so fly bare ground in winter or after a cut when the contours must be right. Where vegetation cannot be avoided, a LiDAR sensor is the correct tool and DroneMapping does not process LiDAR.

A land developer who flies a 40 acre parcel once and exports 1 foot contours as DXF hands the engineer a base map the same day. A flight of 400 photos uses under 3 percent of the 15,000 images Team includes each month.

How it works

From flight to contours in the design file

1. Place 5 or more ground control targets and have your surveyor shoot them, or note existing hard points.

2. Fly a grid at 75 percent front and 70 percent side overlap.

3. Upload the photos and the ground control file.

4. Check the checkpoint report, then draw contours at the interval the report supports.

5. Export DXF or SHP to the design file, or send a view link to the client.

The how it works page shows each step, and ground control points explains how many you need.

Use cases

Who pays for a drone topographic map

  • A civil engineering firm uses the contours as the base for preliminary grading, then sends the surveyor the checkpoint report to review. See drone survey software.
  • A contractor compares the terrain model with the design surface before and after earthmoving. See cut and fill software.
  • A landfill or quarry operator maps the surface every quarter for capacity and volume. See landfill drone survey software.
  • A farm manager or drainage contractor finds low spots and sheet flow from the terrain model. See agriculture drone software.

How the options compare

Drone topography software by price and licensing

Prices are published list prices in USD, checked in October and November 2026. Confirm on your own quote.

Option Published price Where it runs Who can open the result
Agisoft Metashape Professional $3,499 once One computer The person at that computer
DJI Terra Standard $1,680 a year One Windows PC with an NVIDIA card The person at that PC
PIX4Dmapper $3,990 a year One device at a time Same, others get exports
DroneDeploy Flight & Analysis $4,188 a year for 1 admin user Cloud Shared links, more users quoted
DroneMapping Starter $588 a year Cloud 3 seats plus view links
DroneMapping Team $1,488 a year Cloud 10 seats plus view links

More detail is in drone mapping software pricing, and the best drone mapping software page scores each tool by job.

Honest fit

When another method is better

DroneMapping reads RGB photos from mapping drones. It does not process LiDAR or thermal data, and it caps a flight at 500 photos, so large sites are flown in blocks. It is not a stamped survey: where a boundary, a legal quantity or a permit depends on the contours, a licensed surveyor must review the checkpoint report. A site under dense canopy needs LiDAR. Commercial flights in the US need a Part 107 certificate, described on the FAA commercial operators page.

Try it first

Open a processed site in the demo

The demo loads an earthworks pad processed from drone photos. Switch on contours, measure a slope and run cut and fill. No account is needed.

Pricing

What drone topography costs per year

Starter is $99 a month or $588 a year with 3 seats and 3,000 images a month. Team is $249 a month or $1,488 a year with 10 seats, 15,000 images a month, ground control points, checkpoints and contours as DXF and SHP. Business is $599 a month or $3,588 a year with 25 seats and 50,000 images a month. The price does not change with the number of surveys or view links.

Compare drone mapping pricing

Questions

Drone topography software FAQ

It depends on who opens the map. One surveyor who processes alone can use a desktop license such as Metashape Professional at $3,499 once. A team where an engineer, a contractor and a client all open the same terrain model is better served by a seat plan such as DroneMapping Team at $1,488 a year.

Yes. A drone flight builds a terrain model from overlapping photos, and contours are drawn from that model. Accuracy depends on ground control and bare ground, so check the model against surveyed checkpoints before using the contours for design.

With good control and open ground, vertical error is typically a few centimeters to a few inches, which supports 1 foot contours. Under vegetation the error grows. See how accurate drone mapping is.

Yes. On Team, contours export as DXF and SHP, so they open in AutoCAD, Civil 3D, QGIS and ArcGIS without conversion.

Draw contours from your next flight

Upload the photos, check the report and export to CAD.